|
Jump to :
FEATURES ::
WARRANTY ::
INSTALLATION ::
DOWNLOADS ::
BROCHURE
Roomlite provides an effective, low cost solution to
lighten up those dark areas of your home, and making them more usable and
friendly. Now you can have natural light just where you need it.
The tough acrylic dome and flexible light transmitting duct
allows most installations to be done without having to cut ceiling timbers. The
Dome, Flashing and reinforced flexible Duct are pre-assembled. Easy to follow
do-it-yourself instructions are provided, but if preferred, your reseller can
arrange for professional installation at a moderate cost.
The roof flashing is available in a range of Colorbond®
colours to match your steel or tile roof.
There is a Roomlite to suit any room in the home or office.
The RM300 is ideal for bathrooms, walk-in robes and hallways. The larger RM400
and RM500 models suit living areas, kitchens, bedrooms or studies. You can also
enjoy relief ventilation when choosing models RM400 and RM500 as they allow
vented or non-vented fitting.
Features
Sizes
Available in 300mm, 400mm, and 500mm diameter.
Tough Acrylic Dome
The dome is moulded from high impact acrylic for long service. It is fitted to
the flashing with a weatherproof gasket ensuring a water proof seal.
Flexible Duct
A highly efficient flexible, reflective duct, transmits light 'around the bend'
to the diffuser.
Prismatic Ceiling Diffuser
Attractive prismatic diffuser with off-white trim. The Roomlite round prismatic
lens provides optimum spread of light.
Flashing and Colours
The malleable aluminium flashing is easily shaped to suit tile or metal roofs
and is available in a range of colours to match Colorbond® roofing.
Roomlite Kit Content
Pre-assembled Roof Dome/Flashing/Flexible Duct. 2 piece Ceiling Diffuser
with Prismatic Lens. (Venting components RM400 and RM500
only)
Light where you need it
Kitchens, Pantries Living areas Bathrooms Walk-in-Robes Hallways,
Nurseries Laundries Bedrooms, Studies En-suites and Toilets Storerooms,
Workshops
Warranty
Ampelite Australia Pty. Ltd. the manufacturers and
distributors of 'Roomlite ' warrant the product to be free from defects in
materials or workmanship for a period of 5 years from date of purchase. The
acrylic dome is also covered by warranty for 5 years against damage by hail up
to 19 mm in diameter accompanied by winds up to 100 km/hr.
To qualify for protection under this warranty the Roomlite
unit must be installed in domestic premises and subjected only to normal
domestic usage.
If any components fail within the warranty period and are
found defective they will be repaired or replaced at the manufacturer's option.
The component must be returned freight pre-paid by the purchaser to the nearest
Ampelite Australia Pty. Ltd. state office together with proof of purchase
documentation.
Failures caused by incorrect installation, accident,
attempted repair, normal wear and tear are not covered by this warranty.
The manufacturer is not responsible for removal or re-installation costs,
or any consequential damage.
Installation
EASY D.I.Y. OR PROFESSIONALLY
INSTALLED
Fitting instructions are enclosed with the product. The
acrylic dome is factory fitted with a simple, but reliable flashing surround
that suits either tiled or steel clad roofs. The 300 mm dome can be installed
without the need to cut rafters or battens. Installation of the 400 mm and 500
mm sizes is also simple, but you should seek advice from a qualified person if
you decide to make structural changes. The reflective flexible duct is able to
dodge around most obstructions and slips over the ceiling diffuser. Models RM400
and RM500 may be vented or non-vented. Professional fitting can be arranged.
Downloads
Brochure
Roomlite
|
