Jump to :   Industrial Vents :: Solasafe Polycarbonate :: Industrial Fibreglass :: Dual Roofing
Cool-lite GC :: SR76 Smoke Reduced :: Webglas GC :: Wonderglas GC :: Lexan & H-Bar System ::
Lexan & Flexibar System

SPECIFICATIONS

INDUSTRIAL VENTS

"The Wind Driven Ventilators shall be "Ampelair" Model ....................(insert) made from*Stainless Steel / Aluminium **in natural finish / coloured to match Colorbond^® ..............................  Installation shall be in accordance with Ampelair fixing instructions and closely follow SAA HB39 installation procedures.  All work shall be done in a workmanlike manner."
* Insert / select whichever required          ** Select / insert finish required.

SOLASAFE POLYCARBONATE

"The Polycarbonate Sheeting shall be Solasafe *(Corrugated, 5 -Rib, Greca) 0.8mm in thickness as supplied by Ampelite Australia Pty. Ltd. The sheeting shall conform with the nominated profile and colour.  Installation shall be in accordance with Ampelite fixing instructions and with AS/NZS 1562.3 : 1996 Design and installation of sheet roof and wall cladding, Part 3 : Plastic."

*Insert required profile

INDUSTRIAL GRADE SHEETING

"The Translucent Sheeting shall be Ampelite  Fibreglass Reinforced Polyester Sheeting type SC as manufactured by Ampelite Australia Pty. Ltd. to comply with AS/NZS 4256 parts 1 & 2 : 1994.   Licence No. 986.  The weight of the sheet shall be *2400 g/m² and be manufactured to conform to the nominated profile and colour.  Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3 : 1996 Design and installation of sheet roof and wall cladding, Part 3 : Plastic."

*Insert actual sheet weight required.

DUAL ROOFING ANTI CONDENSATION

1. The Translucent Sheeting shall be Ampelite "Wonderglas GC" Gel Coated Fibreglass Reinforced Polyester (exterior sheet) and Ampelite "SR76" Fire Retardant Reinforced Polyester (base sheet) as manufactured by Ampelite Australia Pty. Ltd. to comply with AS/NZS 4256 parts 1 & 2 : 1994.  The weight of the sheet shall be 2400 g/m² and be manufactured to conform to the nominated profile and colour.   Sheeting shall be installed in accordance with Ampelite fixing instructions and with the Plastics Building Sheets - General Installation Requirements and Design of Roofing Systems AS/NZS 1562, Part 3.

2. Colour - Top Sheet to be Opal
                 Base Sheet to be Natural Clear

3. Protective foam strips (55mm x 6mm thick) must be installed underneath the fibreglass sheet, directly on top of purlin and safety mesh.

4. Oversize holes up to 15mm diameter must be drilled at all points of fixing.

5. Note that the fibreglass roofing is double-layered with 20mm air gap.  The two sheets are to be fixed to purlins with the same screws, (i.e. do not fix first sheet and then fix second).
   
   Install base fibreglass layer in conjunction with metal roofing.   Top fibreglass sheet is then laid over first sheet.    Install Ampelite spacing block (self adhesive) over the crest of the ribs on the base sheet.  The top layer of sheeting is then installed, being supported by the spacing block.
   
   Seal the side lap perimeter with nominal 25mm x 5mm thick sealing foam strip.  Air gap is to remain open at gutter and under ridge capping to allow for release of moisture in between sheets.
   
   The final installation is to be waterproof and the air gaps well sealed so that water and dust do not enter cavity.

COOL-LITE GC

"The Translucent Sheeting shall be Ampelite  "Cool-lite GC" gel coated Fibreglass Reinforced Polyester as manufactured by Ampelite Australia Pty. Ltd. to comply with AS/NZS 4256 parts 1 & 2 : 1994.   Licence No. 986.  The weight of the sheet shall be *2400 g/m² and be manufactured to conform to the nominated profile and colour.  Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3 : 1996 Design and installation of sheet roof and wall cladding, Part 3 : Plastic."

*Insert actual sheet weight required.

SR76 - SMOKE REDUCED SHEETING

"The Translucent Sheeting shall be Ampelite  "SR76" Fire Retardant Reinforced Polyester Sheeting type *SC as manufactured by Ampelite Australia Pty. Ltd. to comply with AS/NZS 4256 parts 1 & 2 : 1994,   Licence No. 986.  The weight of the sheet shall be **2400 g/m² and be manufactured to conform to the nominated profile and colour.  Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3 : 1996 Design and installation of sheet roof and wall cladding, Part 3 : Plastic."

*For gel coated surface, replace with the words "Premium Grade Gel Coated".

*Insert actual sheet weight required.

WEBGLAS GC AND GC+

"The Translucent Sheeting shall be Ampelite  *"Webglas GC" / "Webglas GC+" gel coated woven mat Fibreglass Reinforced Polyester as manufactured by Ampelite Australia Pty. Ltd. to comply with AS/NZS 4256 parts 1 & 2 : 1994.   Licence No. 986.  The weight of the sheet shall be 3660 g/m² and be manufactured to conform to the nominated profile and colour.  Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3 : 1996 Design and installation of sheet roof and wall cladding, Part 3 : Plastic."

*Insert which product required.

WONDERGLAS GC

"The Translucent Sheeting shall be "Wonderglas GC" gel coated Fibreglass Reinforced Polyester Sheeting as manufactured by Ampelite Australia Pty. Ltd. to comply with AS/NZS 4256 parts 1 & 3 : 1994.   Licence No. 986.  The weight of the sheet shall be *2400 g/m² and be manufactured to conform to the nominated profile and colour.   Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3 : 1996 Design and installation of sheet roof and wall cladding, Part 3 : Plastic."

*Insert actual sheet weight required.

Lexan* Thermoclear* SHEETING, INCORPORATING AMPELITE'S H-BAR SYSTEM  

“The translucent sheeting shall be “Lexan* Themoclear*” Multi-Wall sheeting as distributed by Ampelite Australia Pty. Ltd.. to comply with AS/NZS/ 4256 parts 1 & 3: 1994. The sheet shall have a gauge of *10mm and a width of **1050mm. The sheeting shall be fixed in accordance with Ampelite’s system incorporating Aluminium H-Bars, End Caps and Gaskets. Both the sheeting and glazing bars will be supplied to conform with the nominated colour. Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3:1996 Design and installation of sheet roof and wall cladding Part 3: Plastic.”

*Insert nominated gauge. **Insert nominated width.

Lexan* Thermoclear* SHEETING, INCORPORATING AMPELITE'S FLEXIBAR SYSTEM

 “The translucent sheeting shall be “Lexan* Themoclear*” Multi-Wall sheeting as distributed by Ampelite Australia Pty. Ltd.. to comply with AS/NZS/ 4256 parts 1 & 3: 1994. The sheet shall have a gauge of *10mm and a width of **1050mm. The sheeting shall be fixed in accordance with Ampelite’s system incorporating Aluminium Flexibars, End Caps and Gaskets. Both the sheeting and glazing bars will be supplied to conform with the nominated colour. Sheeting shall be installed in accordance with Ampelite fixing instructions and with AS/NZS 1562.3:1996 Design and installation of sheet roof and wall cladding Part 3: Plastic.”

*Insert nominated gauge. **Insert nominated width.

ISO 9001 2000        
AS/NZS 4256.3        
QEC 4787