|
AS 1145.1 - 2001 |
AS 4040.1
-
1992 |
|
Determination of tensile properties of plastics materials -
General principles |
Methods of testing sheet roof and wall cladding -
Resistance to concentrated loads |
|
AS 1145.2
-
2001 |
AS 4040.2
-
1992 |
|
Determination of tensile properties of plastics materials -
Test conditions for moulding and extrusion plastics |
Methods of testing sheet roof and wall cladding -
Resistance to wind pressures for non-cyclone regions |
|
AS 1145.3
-
2001 |
AS 4040.3
-
1992 |
|
Determination of tensile properties of plastics materials -
Test conditions for films and sheets |
Methods of testing sheet roof and wall cladding -
Resistance to wind pressures for cyclone regions |
|
AS 1145.4
-
2001 |
AS 4040.4
-
2006 |
|
Determination of tensile properties of plastics materials -
Test conditions for isotropic and orthotropic
fibre-reinforced plastic
composites |
Methods of testing sheet roof and wall cladding -
Resistance to impact (sandbag) - Sheet roof materials |
|
AS 1145.5
-
2001 |
AS/NZS 4040.5
-
1996 |
|
Determination of tensile properties of plastics materials -
Test conditions for fibre-reinforced plastic composites |
Methods of testing sheet roof and wall cladding -
Resistance to impact (sandbag) for wall boards |
|
AS/NZS 1170.0
-
2002 |
AS 4256.1
-
2006 |
Structural design actions - General principles
Amended by AS/NZS 1170.0-2002/Amdt 1:2003,
AS/NZS 1170.0-2002/Amdt 2-2003,
AS/NZS 1170.0-2002/Amdt 4-2005 |
Plastic roof and wall cladding materials -
General requirements |
|
AS/NZS 1170.1
-
2002 |
AS 4256.2
-
2006 |
|
Structural design actions - Permanent, imposed and
other actions
Amended by
AS/NZS 1170.1:2002/Amdt 1:2005 ,
AS/NZS
1170.1:2002/Amdt 2:2009 |
Plastic roof and wall cladding materials - Unplasticized
polyvinyl chloride (uPVC) building sheets |
|
AS/NZS 1170.2
-
2002 |
AS 4256.3
-
2006 |
|
Structural design actions - Wind actions
Amended by AS/NZS 1170.2:2002/Amdt 1:2005 |
Plastic roof and wall cladding materials - Glass fibre
reinforced polyester (GRP) |
|
AS/NZS 1170.3
-
2003 |
AS 4256.5
-
2006 |
|
Structural design actions- Snow and ice actions
Australian/New Zealand Standards/ 01-Jan-2003.
Amended by AS/NZS 1170.3:2003/Amdt 1:2007 |
Plastic roof and wall cladding materials
-
Polycarbonate |
|
AS 1530.2
-
1993 |
AS/NZS 4257.0
-
1994 |
|
Methods for fire tests on building materials, components and
structures - Test for flammability of materials |
Plastic roof and wall cladding materials - Methods of test -
General introduction and list of methods |
|
AS/NZS 1530.3
-
1999 |
AS/NZS 4257.1
-
1994 |
|
Methods for fire tests on building materials, components and
structures - Simultaneous determination
of ignitability, flame propagation, heat release and smoke
release |
Plastic roof and wall cladding materials - Methods of test -
Determination of dimensional properties
Amended by AS/NZS 4257.1:1994/Amdt 1:1995 |
|
AS 1530.8.1
-
2007 |
AS/NZS 4257.2
-
1994 |
|
Methods for fire tests on building materials, components and
structures - Tests on elements of construction for
buildings exposed to simulated bushfire attack - Radiant
heat and small flaming sources |
Plastic roof and wall cladding materials - Methods of test -
Determination of dimensional stability at 60 degrees Celsius |
|
AS 1562.1
-
1992 |
AS/NZS 4257.3
-
1994 |
|
Design and installation of sheet roof and wall cladding -
Metal
Amended by
AS 1562.1-1992/Amdt 1-1993,
AS 1562.1-1992/Amdt 2-1995 |
Plastic roof and wall cladding materials - Methods of test -
Determination of mass per unit area of sheet |
|
AS 1562.3
-
2006 |
AS/NZS 4257.4
-
1994 |
|
Design and installation of sheet roof and wall cladding -
Part 3: Plastic |
Plastic roof and wall cladding materials - Methods of test -
Determination of diffuse light transmission |
|
AS 2428.1
-
2004 |
AS/NZS 4257.5
-
1994 |
|
Methods of testing smoke/heat release vents -
Determination of resistance to leakage during rain |
Plastic roof and wall cladding materials - Methods of test -
Determination of glass fibre content |
|
AS 2428.2
-
2004 |
AS/NZS 4257.6
-
1994 |
|
Methods of testing smoke/heat release vents - Determination of
ability to operate under wind loading |
Plastic roof and wall cladding materials - Methods of test -
Determination of impact resistance
Amended by AS/NZS 4257.6:1994/Amdt 1:1995 |
|
AS 3959
-
2009 |
AS/NZS 4257.7
-
1994 |
|
Construction of buildings in bushfire-prone area.
Amended by AS 3959-2009/Amdt 1-2009 |
Plastic roof and wall cladding materials - Methods of test -
Determination of colourfastness, light transmission and impact
resistance following ultraviolet light exposure |
|
AS 4040.0
-
1992 |
AS/NZS 4740
-
2000 |
|
Methods of testing sheet roof and wall cladding - Introduction,
list of methods and general requirements |
Natural Ventilators - Classification and Performance |
