Standards

AS 1145.1 – 2001 AS 4040.1 – 1992
Determination of tensile properties of plastics materials – General principles Methods of testing sheet roof and wall cladding – Resistance to concentrated loads
AS 1145.2 – 2001 AS 4040.2 – 1992
Determination of tensile properties of plastics materials – Test conditions for moulding and extrusion plastics Methods of testing sheet roof and wall cladding – Resistance to wind pressures for non-cyclone regions
AS 1145.3 – 2001 AS 4040.3 – 1992
Determination of tensile properties of plastics materials – Test conditions for films and sheets Methods of testing sheet roof and wall cladding – Resistance to wind pressures for cyclone regions
AS 1145.4 – 2001 AS 4040.4 – 2006
Determination of tensile properties of plastics materials – Test conditions for isotropic and orthotropic fibre-reinforced plastic composites Methods of testing sheet roof and wall cladding – Resistance to impact (sandbag) – Sheet roof materials
AS 1145.5 – 2001 AS/NZS 4040.5 – 1996
Determination of tensile properties of plastics materials – Test conditions for fibre-reinforced plastic composites Methods of testing sheet roof and wall cladding – Resistance to impact (sandbag) for wall boards
AS/NZS 1170.0 – 2002 AS 4256.1 – 2006
Structural design actions – General principles Amended by AS/NZS 1170.0-2002/Amdt 1:2003,
AS/NZS 1170.0-2002/Amdt 2-2003,
AS/NZS 1170.0-2002/Amdt 4-2005
Plastic roof and wall cladding materials – General requirements
AS/NZS 1170.1 – 2002 AS 4256.2 – 2006
Structural design actions – Permanent, imposed and other actions Amended by
AS/NZS 1170.1:2002/Amdt 1:2005 ,
AS/NZS 1170.1:2002/Amdt 2:2009
Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets
AS/NZS 1170.2 – 2002 AS 4256.3 – 2006
Structural design actions – Wind actions Amended by AS/NZS 1170.2:2002/Amdt 1:2005 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS/NZS 1170.3 – 2003 AS 4256.5 – 2006
Structural design actions- Snow and ice actions Australian/New Zealand Standards/ 01-Jan-2003. Amended by AS/NZS 1170.3:2003/Amdt 1:2007 Plastic roof and wall cladding materials – Polycarbonate
AS 1530.2 – 1993 AS/NZS 4257.0 – 1994
Methods for fire tests on building materials, components and structures – Test for flammability of materials Plastic roof and wall cladding materials – Methods of test – General introduction and list of methods
AS/NZS 1530.3 – 1999 AS/NZS 4257.1 – 1994
Methods for fire tests on building materials, components and structures – Simultaneous determination of ignitability, flame propagation, heat release and smoke release Plastic roof and wall cladding materials – Methods of test – Determination of dimensional properties Amended by AS/NZS 4257.1:1994/Amdt 1:1995
AS 1530.8.1 – 2007 AS/NZS 4257.2 – 1994
Methods for fire tests on building materials, components and structures – Tests on elements of construction for buildings exposed to simulated bushfire attack – Radiant heat and small flaming sources Plastic roof and wall cladding materials – Methods of test – Determination of dimensional stability at 60 degrees Celsius
AS 1562.1 – 1992 AS/NZS 4257.3 – 1994
Design and installation of sheet roof and wall cladding – Metal Amended by
AS 1562.1-1992/Amdt 1-1993,
AS 1562.1-1992/Amdt 2-1995
Plastic roof and wall cladding materials – Methods of test – Determination of mass per unit area of sheet
AS 1562.3 – 2006 AS/NZS 4257.4 – 1994
Design and installation of sheet roof and wall cladding – Part 3: Plastic Plastic roof and wall cladding materials – Methods of test – Determination of diffuse light transmission
AS 2428.1 – 2004 AS/NZS 4257.5 – 1994
Methods of testing smoke/heat release vents – Determination of resistance to leakage during rain Plastic roof and wall cladding materials – Methods of test – Determination of glass fibre content
AS 2428.2 – 2004 AS/NZS 4257.6 – 1994
Methods of testing smoke/heat release vents – Determination of ability to operate under wind loading Plastic roof and wall cladding materials – Methods of test – Determination of impact resistance Amended by AS/NZS 4257.6:1994/Amdt 1:1995
AS 3959 – 2009 AS/NZS 4257.7 – 1994
Construction of buildings in bushfire-prone area. Amended by AS 3959-2009/Amdt 1-2009 Plastic roof and wall cladding materials – Methods of test – Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
AS 4040.0 – 1992 AS/NZS 4257.8 – 1994
Methods of testing sheet roof and wall cladding – Introduction, list of methods and general requirements Plastic roof and wall cladding materials – Method 8 – determination of residual styrene PCP program PCP 05.
AS/NZS 4740 – 2000
Natural Ventilators – Classification and Performance