Webglas GC

Overview

Webglas GC (GC = gel coated surface) is proving its worth in buildings where steel and other roofing or wall cladding materials deteriorate or corrode at an unacceptable rate.   The sheet weight is 3660 grams per square metre and is reinforced with a heavy gauge woven glass mat which provides continuous strength and protection in every direction.  The overall strength is such that wire safety mesh is not required.   This is a particularly important benefit in aggressive and corrosive environments that can quickly destroy metal.

Where corrosion resistance is vital, complete buildings may be clad and roofed with "Webglas GC" which can be 100% opaque, or translucent to transmit natural light.  For extreme environments, where high levels of acids or alkalines may occur, "Webglas GC+" which incorporates vinyl ester resins, will provide additional protection.  What really sets Webglas apart from traditional building materials is its combination of strength, resistance to a wide range of chemicals and low surface erosion.  The warranty covers surface erosion for 20 years.

The special resin technology used in the UV resistant surface coating is the same as that used for Ampelite's premium grade "Wonderglas GC", now very widely used in major projects around Australia.  "Webglas GC" therefore provides low maintenance roofing and cladding guaranteed for a specific lifetime.

"Webglas GC" polyester sheeting is reinforced with heavy gauge woven matting that acts a a built in safety mesh.  "Webglas GC" fully complies, without restriction, to the requirements of Class 2 to Class 9 buildings of the Building Code of Australia.

For more information on Ampelite’s Gel Coat technology, click here.

"Webglas GC"

Polyester resin base sheet with Isopthalic NPG Gel Coated surface.  Continuous woven mat reinforcement.

"Webglas GC+"

Vinylester resin base sheet with Isopthalic NPG Gel Coated surface.  Continuous woven mat reinforcement.

All resins are UV stabilised and acrylic modified to provide excellent weather resistance.  If cleaned regularly the sheeting retains its original bright appearance over many years.

Both products withstand environments that corrode or destroy metal and many plastics in a short period of time. "Webglas GC+" provides additional protection where there are high concentrations of alkalines or acids.  See the "Chemical Resistance" table for details.

Available Profiles

All current profiles (see link below) such as Corrugated, Trimdek, Speed-dek, etc. plus most superseded profiles are available.  Click here to view profiles.

Quality

Ampelite "Webglas GC" & "Webglas GC+"fully comply with the building code of Australia, Class 2 to Class 9 Buildings, including Part BI which takes into account Australian and New Zealand Standards AS1170.2:1989, AS/NZS 4256.3:1994, AS/NZS 1562.3:1996, AS4040.1:1992.

Fire Retardant Properties

Webglas GC and GC+ fully comply with Building code specification C1.10 in particular AS1530.3: 1989.

Applications

Fertilizer and Agricultural Chemical Plants
Corrosive Chemical processing
Petrochemical environments
Wastewater Treatment
Marine Environments
Mining Industry
Paper and pulp manufacturing
Salt extraction and desalination plants
Power Stations
Skylighting where safety mesh is not desirable

Sheeting Grades

Important: Heavier grades give the specifier the option to use Ampelite sheeting in cyclonic zones, or match the span of the nominated steel roofing material (see 'Spanning Capacity').

Light and Heat Transmission

Other colours can be produced to order for viable quantities, please contact your local Ampelite office

Span and Fastener Table

* Maxmum span for complete "Webglas GC" roof, allowing for concentrated load as per AS1170.2

Expansion Data

Physical Properties

Installation

Fixing Details

In corrosive environments we recommend that:

1. All fixings be Stainless Steel.
2. All fixings be Cyclonic Assemblies.

Flashing and Capping

We recommend that all be Stainless Steel.

Technical Support

Projects involving corrosive environments often require supportive evidence regarding product suitability or manufacturers recommendations regarding the use of a particular material.  Ampelite can provide extensive technical support to the extent of product development if necessary.  Contact your local Ampelite Office if you require this service.

Chemical Resistance

Warranty

Webglas GC  features a limited 20 year warranty. For full warranty details, please contact your nearest Ampelite office.

Downloads

Project Photos

Brochures

Webglas GC Fibreglass Part2